Hot Water Generator

Nexgen Series

Standard Series

Slip-in

These duct heaters are designed for convenience, as the entire frame except the Terminal Box can slip inside the duct with clearance all around. This advantages allows for the completion of duct work before the installation, making the process more efficient. With a rating of up to 90KW, the heating system is designed with a single skin insulation. For added safety, the system is fete with safety interlock. The enclosure is suitable for indoor installation. According to the KW rating, the units are available in multiple stages. The switching mechanism consists of de energizing magnetic contactors or thyristor control for reliable operations.

Standard Built-In Control Package:

  • The heater Frame and Control Cabinet are made from galvanized steel sheets (GPSP). A stainless steel frame is available as an option. The control cabinet is powder-coated CRCA steel with louvers to ensure adequate ventilation of the control and heater terminal compartment.
  • Insulation – to minimize heat loss, the heater section is insulated with 50mm thick resin-bounded fiberglass/mineral wool of density 32kg/cm3 and cladded with a GPSP sheet.
  • Miniature circuit breaker / Disconnect switch with fuses
  • De-energizing contactors / Thyristor unit to operate heater in back and step-less operation.
  • Remote interlock to energize or de-energize the unit from remote or any field interlock
  • Pilot lights for functional indications such as ON Status, Trip status
  • BMS Compatible
  • Dry contact for start/stop command, on/off status indication, fault indications

 

Standard Safety Features

  • Primary Thermal cutouts (adjustable) – to protect against overheating
  • Secondary ThermostatKLIXON(register sign) Preset at 85.c flowing
  • Copper-coated earthing studs
  • Terminal blocks for Power and Control Wiring
Slip InSlip In

Specification

Application
Air Duct
Installation
Entire frame except Terminal Box slips inside the duct with clearance all around
Advantage
Allows completion of Duct work before Installation
System
240V, 1Phase or 415V, 3Phase
Rated Frequency
50 Hz
Rating
Upto 90KW
Insulation
Single skin
Heaters
AISI 304 stainless steel Tubular heaters
Safety
Fitted with Safety interlock
Enclosure
Suitable for Indoor installation with Ingress protection IP-42
Switching
De-energizing magnetic contactors / Thyristor control

PROJECTS